Table of Contents
Advertisement
Wood Panels
Care of Safety Belts
Use a Clean cloth moistened in Warm, soapy water (use
Keep belts clean and dm
mild dish washing soap). Dry the wood immediately
with a clean cloth.
Glass Surfaces
Glass should be cleaned often. GM Glass Cleaner or a
liquid household glass cleaner will remove normal
tobacco smoke and dust films on interior glass. See
GM Vehicle Care/Appearance Materials on page 5-85.
Do not bleach
OL
-ye
-.-.
y belts. If you dc,
.t
may severely weaken them. In a crash, they
might not be able to provide adequate
protection. Clean safety belts only with mild
soap and lukewarm water.
Notices Don't use abrasive cleaners on glass,
because they may cause scratches. Avoid placing
decals on the inside rear window, since they
may have to be scraped off later. If abrasive cleaners
are used on the inside of the rear window, an
Weatherstrips
electric defogger element may be damaged. Any
defogger
grid.
longer, seal better, and
not
stick or squeak. Apply
temporary license should not be attached across the
Silicone grease O n weatherstrips Will make them last
silicone grease with a clean cloth at least every six
months. During very cold, damp weather more frequent
application may be required. See Part D: Recommended
Fluids and Lubricants on page 6-33.
5-8 1
Advertisement
Chapters
Table of Contents
