Hydraulic Clutch - Chevrolet 2003 Blazer Owner's Manual

Then, follow these steps:
How to Add Fluid
1.
2.
3.
Here's how to add fluid. Refer to the Maintenance
Schedule to determine what kind of fluid to use. See
Part D: Recommended Fluids and Lubricants on
page 6-33.
1. Remove the filler plug.
2. Add fluid at the filler plug hole. Add only enough
fluid to bring the fluid level up to the bottom of the
filler plug hole.
seated.
3. Install the filler plug. Be sure the plug is fully
Hydraulic Clutch
The hvdraulic clutch linkage in your vehicle is
Remove the filler plug. self-adjusting. The clutch master cylinder reservoir is
Check that the lubricant level is up to the bottom of
the filler plug hole. It is not necessary to regularly check clutch fluid unless
If the fluid level is good, install the plug and be sure fluid won't correct a leak.
it is fully seated. If the fluid level is low, add more
fluid as described in the next steps. A fluid loss in this system could indicate a problem.
filled with hydraulic clutch fluid.
you suspect there is a leak in the system. Adding
Have the system inspected and repaired.
5-22