Advertisement
Installation
Open the packing carefully not to damage the
product.
Always follow assembly instruction when you
assemble your product.
When moving the glass elements make sure
you don't place them on hard surfaces as they
will break easily.
When assembling the product make sure you
can support the wall element until they are
stable.
Taiga Concept recommend to use authorized
installation persons and will not take
responsibility for any harm to persons or
goods due to irresponsible actions.
Product may have some smell after assembling
but it will disappear in few weeks.
Before installation find out your country fire
regulation and contact your local Taiga dealer.
Do not carry out your own modifications to the
product, as it will automatically end warranty.
Check building / floor weight capacity before
assembling the products.
www.taigaconcept.com
Maintenance
After assembling the product, wipe all surfaces
with clean damp cloth. Avoid using too much
water, as it will damage the product. Prolonged
direct sunlight may change the color of
wooden surfaces over time.
Check tightness of hinges and door position
every six month.
Choosing location
Always place the product inside the building.
Room temperature needs to be minimum 10°C.
Do not place the product to space that is wet
or where has high humidity.
Place the product so that the minimum space
between roof element and ceiling needs to be
at least 10 cm. Building ceiling height minimum
of 230 cm.
When placing the product make sure the door
will not block any walkway and that it does not
damage when open.
Maximum floor deflection ≤ 0,7° degree /
meter.
Warranty / Contact
Upon successful installation please inform the
local Taiga dealer to activate the warranty.
Warranty is not valid if assembly has been
carried out in contradiction to the installation
guide.
It is recommended to use Taiga Concept local
dealers authorized assembling person.
If you have any questions or problems during
installation, please contact your local Taiga
dealer.
Advertisement
