Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Taiga Concept Manuals
  4. Indoor Furnishing
  5. LOHKO BOX 2
  6. Assembly manual

Taiga Concept LOHKO BOX 2 Assembly Manual

Hide thumbs Also See for LOHKO BOX 2:

Advertisement

Quick Links

Download this manual
www.taigaconcept.com
ASSEMBLY
GUIDE
LOHKO BOX 2
x2
3h

Advertisement

loading

Related Manuals for Taiga Concept LOHKO BOX 2

Summary of Contents for Taiga Concept LOHKO BOX 2

  • Page 1 ASSEMBLY GUIDE LOHKO BOX 2...
  • Page 2 If you find damage, document with photos according instructions Check if there is any damage Remove top cover and check that Carry the elements Assemble the product to the package there are no signs of damage before Note: Take extra care unpacking.
  • Page 3 1. Take images where you can see 2. Take closer images of the damage 3. Contact your local Taiga dealer full package from 2 different angles which show the damage 1. Take images where you can see 3. Contact your local Taiga dealer 2.

  • Page 4: Installation

    Product may have some smell after assembling It is recommended to use Taiga Concept local but it will disappear in few weeks. Place the product so that the minimum space dealers authorized assembling person.

  • Page 5: Elements & Components

    Elements & Components 1x CD004 1x CR002 1x CF002 1x CD005 2x CD006 1x CR003 1x CF003 2x SR006 1x SR005 1x CG003 1x SR007 1x CW006 2x CG004 1x CW003 1x EP106 1x CW004 3x CG005 200cm 500cm 1x EC1xx 1x EC221 2x CA2xx 1x CW005...
  • Page 6 Elements & Equipments Components & tools Roof 4x SC006 2x SR001 4x SS002 Gloves Safety glasses Safety shoes Safety helmet Doorframe & acoustic panel Roof 4x SS003 8x SC001 16x SC002 2x SS004 Wall connector Hinges Screw machine + bits Hex key set Spirit leveler Small adjustable...
  • Page 7 ATTENTION Never put glass against hard surface, use always carton or carpet under the glass. Use always 2 person and suction cups to lift glass...
  • Page 8 SR005 SR003 CF003 CF002...
  • Page 9 SC007...
  • Page 10 SR003...
  • Page 11 CW006...
  • Page 12 SS002 CG005...
  • Page 13 CW005...
  • Page 14 SS002 CG005...
  • Page 15 SR006...
  • Page 16 CW003...
  • Page 17 SR006...
  • Page 18 CW004...
  • Page 19 SH001 Warning: Do not apply excessive force SR003 SC003...
  • Page 20 CR002 Do not scratch the element surfaces and be careful with sharp edges...
  • Page 22 SR007...
  • Page 23 CR002...
  • Page 24 5 mm...
  • Page 25 SC001...
  • Page 26 EP109...
  • Page 28 SS005 CG005...
  • Page 31 SS004...
  • Page 32 CG004 CG004...
  • Page 33 SC002 CD006...
  • Page 34 CD006...
  • Page 35 SC002...
  • Page 36 SS003 HINGE SIDE CONTROL PANEL SIDE...
  • Page 37 CD005...
  • Page 38 EP106...
  • Page 39 CD004...
  • Page 40 91 cm...
  • Page 41 SR001...
  • Page 42 SCA002...
  • Page 43 SH00x CG003 Clean the glass before assembling the hinges.
  • Page 44 BOTTOM BOTTOM Torque = 20 Nm Never use drilling machine to tighten hinge screws...
  • Page 46 SC005 > 130 ° Make sure that door glass will not touch hinge support parts while and after assembling the door...
  • Page 47 SC005 > 130 °...
  • Page 48 SF003 SF001...
  • Page 49 SC002...
  • Page 50 CA2xx...
  • Page 51 SM001 To increase magnetic strength add small magnets to metallic strip (no screws required)
  • Page 52 Option 1: Powercord assembled from oor level Option 2: Powercord assembled from roof level...
  • Page 53 Turn on the ventilation, check each side and corner of the door by hand that there is no air leaks Check if there is any air leak between frames and elements/glasses. Check that door glass touches the seals when door is closed...
  • Page 54 www.taigaconcept.fi Assembly support +358 401 384 02...