Advertisement
Installation
Open the packing carefully not to damage the
product.
Always follow assembly instruction when you
assemble your product.
When moving the glass elements make sure you don't
place them on hard surfaces as they will break easily.
When assembling the product make sure you can
support the wall element until they are stable.
Taiga Concept recommend to use authorized
installation persons and will not take
responsibility for any harm to persons or goods due to
irresponsible actions.
Product may have some smell after assembling but it
will disappear in few weeks.
Before installation nd out your country re regulation
and contact your local Taiga dealer.
Do not carry out your own modi cations to the
product, as it will automatically end warranty.
Check building / oor weight capacity before
assembling the products.
www.taigaconcept.com
Maintenance
After assembling the product, wipe all surfaces with
clean damp cloth. Avoid using too much water, as it
will damage the product. Prolonged direct sunlight
may change the color of wooden surfaces over time.
Check tightness of hinges and door position every six
month.
Choosing location
Always place the product inside the building.
Room temperature needs to be minimum 10°C.
Do not place the product to space that is wet or where
has high humidity.
Place the product so that the minimum space between
roof element and ceiling needs to be at least 10 cm.
Building ceiling height minimum of 230 cm.
When placing the product make sure the door will not
block any walkway and that it does not damage when
open.
Maximum oor de ection ≤ 0,7° degree / meter.
Warranty / Contact
Upon successful installation please inform the local
Taiga dealer to activate the warranty.
Warranty is not valid if assembly has been carried out
in contradiction to the installation guide.
It is recommended to use Taiga Concept local dealers
authorized assembling person.
If you have any questions or problems during
installation, please contact your local Taiga dealer.
Advertisement
