Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Taiga Concept Manuals
  4. Indoor Furnishing
  5. LOHKO BOX 7
  6. Assembly manual

Taiga Concept LOHKO BOX 7 Assembly Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
www.taigaconcept.com
ASSEMBLY
GUIDE
LOHKO BOX 7
x2
5h

Advertisement

loading

Related Manuals for Taiga Concept LOHKO BOX 7

Summary of Contents for Taiga Concept LOHKO BOX 7

  • Page 1 ASSEMBLY GUIDE LOHKO BOX 7...

  • Page 2: Installation

    Product may have some smell after assembling It is recommended to use Taiga Concept local but it will disappear in few weeks. Place the product so that the minimum space dealers authorized assembling person.
  • Page 3 If you find damage, document with photos according instructions Check if there is any damage Remove top cover and check that Carry the elements Assemble the product to the package there are no signs of damage before Note: Take extra care unpacking.
  • Page 4 1. Take images where you can see 2. Take closer images of the damage 3. Contact your local Taiga dealer full package from 2 different angles which show the damage 1. Take images where you can see 3. Contact your local Taiga dealer 2.

  • Page 5: Elements & Components

    Elements & Components 1x CD004 1x CR007 1x CF007 1x CD005 1x CR004 2x CF006 2x CD006 2x CR006 6x SR006 1x CF004 1x CG003 3x SR007 1x CW020 2x CG004 1x CW016 1x EP106 3x CG005 1x CW017 200cm 500cm 1x EC1xx 1x EC221...
  • Page 6 Elements & Equipments Components & tools Roof 12x SC006 4x SR001 4x SS002 Gloves Safety glasses Safety shoes Safety helmet Doorframe & acoustic panel Roof 4x SS003 24x SC001 24x SC002 2x SS004 Wall connector Hinges Screw machine + bits Hex key set Spirit leveler Small adjustable...
  • Page 7 ATTENTION Never put glass against hard surface, use always carton or carpet under the glass. Use always 2 person and suction cups to lift glass...
  • Page 8 SR003 CF007 CF006 CF006 CF004...
  • Page 9 SC006...
  • Page 10 SR003...
  • Page 11 CW020...
  • Page 12 SS002 CG005...
  • Page 13 CW019...
  • Page 14 SS002 CG005...
  • Page 15 SR006 SR006...
  • Page 16 SC008 SR006 CW018 CW018 SR006 SC003...
  • Page 17 SC008 CW018 SR006 SR006 CW018...
  • Page 18 SR003 Warning: Do not apply excessive force...
  • Page 19 CR007 SR001...
  • Page 20 CW016 CW017...
  • Page 21 SC008 SR003...
  • Page 22 SR007 EC220 EC221...
  • Page 23 CR006...
  • Page 24 SR007...
  • Page 25 CR006...
  • Page 26 SR007...
  • Page 27 CR004...
  • Page 28 5 mm 5 mm 5 mm 5 mm...
  • Page 29 SC001...
  • Page 30 SS005...
  • Page 31 CG005...
  • Page 33 EC220 EC221 EP109 EC221 EC220 EC1xx...
  • Page 34 SS004...
  • Page 35 CG004 CG004...
  • Page 36 SC002 CD006...
  • Page 37 CD006...
  • Page 38 SC002...
  • Page 39 HINGE SIDE CONTROL PANEL SIDE...
  • Page 40 CD005...
  • Page 41 EP106...
  • Page 42 CD005...
  • Page 43 91 cm...
  • Page 44 SR001 SCA007...
  • Page 45 SH00x CG003 Clean the glass before assembling the hinges.
  • Page 46 BOTTOM BOTTOM Torque = 20 Nm Never use drilling machine to tighten hinge screws...
  • Page 48 SC005 > 130 ° Make sure that door glass will not touch hinge support parts while and after assembling the door...
  • Page 49 SC005 > 130 °...
  • Page 50 SF003 SF001 Turn on the ventilation, check each side and corner of the door by hand that there is no air leaks...
  • Page 51 SM001 To increase magnetic strength add small magnets to metallic strip (no screws required)
  • Page 52 SC002...
  • Page 53 CA2xx CA2xx CA2xx CA2xx...
  • Page 54 Option 1: Powercord assembled from oor level Option 2: Powercord assembled from roof level...
  • Page 55 ll the holes with rubber seal SR006 Turn on the ventilation, check each side and corner of the door by hand that there is no air leaks Check if there is any air leak between frames and elements/glasses. Check that door glass touches the seals when door is closed...
  • Page 56 www.taigaconcept.fi Assembly support +358 401 384 02...