We highly recommend you create a strong password of your own choosing (Using a minimum of 8
characters, including at least three of the following categories: upper case letters, lower case
letters, numbers, and special characters.) in order to increase the security of your product. And we
recommend you reset your password regularly, especially in the high security system, resetting the
password monthly or weekly can better protect your product.
Enter the password to activate the IP camera (s) connected to the device.
Optionally, check Export GUID to export the GUID for future password resetting.
Click OK to save the password and activate the device.
After the device is activated, you should properly keep the password.
●
When you have enabled Export GUID, continue to export the GUID file to the USB flash drive
●
for the future password resetting.
You can duplicate the password to the IP cameras that are connected with default protocol.
●
Configure Unlock Pattern for Login
For the admin user, you can configure the unlock pattern for device login.
After the device is activated, you can enter the following interface to configure the device
unlock pattern.
Network Video Recorder Quick Start Guide
Setting Admin Password
20