Advertisement
Available languages
Available languages
Quick Links
Assembly instructions
PUSH IN connector with push-button –
BUF 10.16
OMNIMATE Power – series BUF 10.16/180
All other technical data can be obtained from the data sheet.
Cables suitable for connection:
Strip the insulation from the cables to a length of approx. 12 mm ± 1 mm. If you are using wire-end ferrule with plastic collars,
strip the cables according to the table below.
Solid (H05(07) V-U)
Flexible (H05(07) V-K)
with wire-end ferrule according to DIN 46 228/1
with wire-end ferrule; with collar DIN 46 228/4
AWG
We recommend using the following wire-end ferrules with plastic collar:
Cable diameter
2.5 mm²
4 mm²
6 mm²
10 mm²
16 mm²
We recommend using the following wire-end ferrules without plastic collar:
Cable diameter
2.5 mm²
4 mm²
6 mm²
10 mm²
16 mm²
min.
cable connection cross-section
2.5 mm²
2.5 mm²
2.5 mm²
2.5 mm²
12
Type
Weidmüller color code
Order number
H2,5/25
9019180000
H4,0/26
9019210000
H6,0/26
0565700000
H10,0/28
0565800000
H16/28
0566000000
Type
Order number
H2,5/18
9004090000
H4,0/18
9004110000
H6,0/18
9004130000
H10,0/18
0379300000
H16,0/18
0375200000
We reserve the right to make technical changes. Personal support can be found on our website: www.weidmueller.com/contact
max.
cable connection cross-section
10 mm²
16 mm²
16 mm²
16 mm²
4
DIN color code
Stripping length
Order number
9019180000
20 ± 1 mm
9019210000
20 ± 1 mm
9019230000
20 ± 1 mm
9019250000
21 ± 1 mm
9019270000
21 ± 1 mm
Stripping length
18 ± 1 mm
18 ± 1 mm
18 ± 1 mm
18 ± 1 mm
18± 1 mm
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Weidmüller BUF 10.16
Summary of Contents for Weidmüller BUF 10.16
- Page 1 Assembly instructions PUSH IN connector with push-button – BUF 10.16 OMNIMATE Power – series BUF 10.16/180 All other technical data can be obtained from the data sheet. Cables suitable for connection: Strip the insulation from the cables to a length of approx. 12 mm ± 1 mm. If you are using wire-end ferrule with plastic collars, strip the cables according to the table below.
- Page 2 PUSH IN connector BUF 10.16 Retaining hook push-button (slider/pusher) conductor entry spring clamp Delivery status: • The push-buttons (slider/pusher) are engaged, the clamping units are open. Recommended tool: • Screwdriver blade 0,8 x 4,0 • Screwdriver blade standard DIN 5264 Connecting conductors: 1.
- Page 3 Montageanleitung PUSH IN Steckverbinder mit Betätigungselement – BUF 10.16 OMNIMATE Power – Serie BUF 10.16/180 Alle weiteren technischen Daten sind dem Datenblatt zu entnehmen. Anschließbare Leiter: Isolieren Sie die Leitungen auf einer Länge von ca. 18 mm ±1 mm ab. Wenn Sie Aderendhülsen mit Kunststoffkragen verwenden, isolieren Sie die Leitungen gemäß...
- Page 4 PUSH IN Steckverbinder BUF 10.16 Rasthaken Betätiger (Schieber/Pusher) Leitereinführung Klemmfeder Auslieferungszustand: • Die Betätiger (Schieber/Pusher) sind verrastet, die Klemmstellen sind geöffnet. Empfohlenes Betätigungswerkerkzeug: • Schraubendreherklinge 0,8 x 4,0 • Schraubendreherklinge Norm DIN 5264 Anschließen der Leiter: 1. Leiter anschließen: Stecken Sie den Leiter, bis zum Anschlag, in die Klemmstelle ein.
Need help?
Do you have a question about the BUF 10.16 and is the answer not in the manual?
Questions and answers