Battery - BRP Can-Am Spyder RT 2013 Series Manual

rmr2010-038-026_a
1. Gold M6 screws
23. Install black M6 hexagonal flange screws to
secure top of storage compartment.
rmr2010-038-025_a
1. Black M6 screws
24. Torque upper and lower M6 hexagonal flange
screws.
PART
M6 hexagonal flange
screws

Battery

The battery is located at the front of the cargo
module.
1. Pull down the rubber strap to disengage it from
the hook.
SERVICE
TORQUE
4.5 N•m (40 lbf•in)
rbl2013-003-012_a
TYPICAL
1. Battery
2. Rubber strap
3. Hook
2. Remove bracket and battery from the vehicle.
rbl2013-003-012_b
TYPICAL
1. Battery
2. Bracket
If you do not have a fully charged battery at
NOTE:
hand, the fully charged battery can be put in place
later.
IMPORTANT: It is of the upmost importance for
the battery life span that the battery initial charg-
ing be performed. Refer to the latest
ROADSTER BATTERY ACTIVATION, CHARG-
ING AND MAINTENANCE
search the latest Service Bulletin in BOSSWEB
or Knowledge Center are :"roadster battery
activation" including quotation marks.
3. Install charged battery in battery rack.
NOTICE
Always charge battery before its in-
stallation on the vehicle.
2013-2
CAN-AM
. Correct keywords to
15 / 47