Baxi TXW1AC User And Installation Manual page 35

Users can set shutdown timing time when the unit is running, and set starting up
timing time when the unit is stand by.
1. Press "Timer" button when the unit is running, the wired controller will display "
" and users can set the shutdown timing time; when the unit is standby,
the wired controller will display "
timing time.
2. After entering timing time setting interface, the default timing time is 0.5h, at this
moment, press "
pressed for 10 seconds, the timing setting will be cancelled, and then return to the
state of non-timing.
3. After the setting of timing, press "Timer" button again to confirm. The timing
setting is successful and the time bar will stop blinking.
4. After the setting "Timer On" function, you can adjust the fan speed, running
mode, set temperature, and swing angle. lf there is no operation for 10 seconds,
standby screen will be displayed.
" or "
" button to regulate the timing time. If the button is not
", and users can set the starting-up