Baxi TXW1AC User And Installation Manual page 41

Cancel light sensation:
1. When light sensation function is on, press "Function" button to enter the
interface of function selection.
2. Press " " or "
flashing.
Press "Function" button again to cancel light sensation function, icon "
3.
disappear.
The setting of "Clean" function
Clean function: The air conditioner can clean the evaporator automatically, which
can not only keep air fresh, but also reduce the recession of cooling effect.
Enter clean function:
1. In the state of standby, press "Function" button to enter the interface of function
selection, icon "
Press "Function" button again to confirm clean function, at this moment, icon "
2.
" is lighting.
3. When the unit is performing clean function, the wired controller will keep
displaying icon "
" button to switch to light sensation function, icon is
" is flashing.
", until it is finished.
" will