Chevrolet 2000 Lumina Owner's Manual page 207

If you see a stream of coolant coming from an air
bleed valve, close the valve. Otherwise, close the
valves after the radiator is filled.
5. Rinse or wipe any spilled coolant from the engine
and the compartment.
6. Then fill the coolant recovery tank to the
COLD mark.
7. Put the cap back on the coolant recovery tank, but
leave the pressure cap off.
4. Fill the radiator
with the proper
R
-
DEX COOL
coolant mixture, up
to the base of the
filler neck. (See
"Engine Coolant"
in the Index for
more information
about the proper
coolant mixture.)
8. Start the engine and let it run until you can feel the
upper radiator hose getting hot. Watch out for the
engine cooling fans.
9. By this time, the coolant level inside the radiator
filler neck may be lower. If the level is lower, add
more of the proper DEX
through the filler neck until the level reaches the
base of the filler neck.
R
-
COOL coolant mixture
5-19