Chevrolet 2000 Impala Owner's Manual page 175

Playing a Cassette Tape
Your tape player is built to work best with tapes that are
up to 30 to 45 minutes long on each side. Tapes longer
than that are so thin they may not work well in this
player. The longer side with the tape visible should face
to the right. If the ignition is on, but the radio is off, the
tape can be inserted and will begin playing. A tape
symbol is shown on the display whenever a tape is
inserted. If you hear nothing but a garbled sound, the
tape may not be in squarely. Press EJT to remove the
tape and start over.
While the tape is playing, use the VOL, FADE, BAL,
TREB, BASS and SEEK controls just as you do for the
radio. The display will show TAPE and an arrow
showing which side of the tape is playing.
If you want to insert a tape when the ignition is off, first
press EJT or DISP.
PREV (1): Press this button to go to the beginning of the
current selection. If the PREV button is pressed and the
current selection has been playing from 3 to 13 seconds, it
will go to the beginning of the previous selection. If you
press the button more than once, the player will continue
moving back through the tape. SEEK and a negative
number will appear on the display. Your tape must have at
least three seconds of silence between each selection for
PREV to work. The sound will mute while seeking.
3-32
NEXT (2): Press this button to go to the next selection on the
tape. If you press the button more than once, the player will
continue moving forward through the tape. SEEK and a
positive number will appear on the display. Your tape must
have at least three seconds of silence between each selection
for NEXT to work. The sound will mute while seeking.
REV (3): Press this button to reverse the tape rapidly.
Press it again to return to playing speed. The radio will
play the last selected station while the tape reverses.
You may select stations during REV operation by using
TUNE, SEEK, and P.SCAN controls.
FWD (4): Press this button to advance quickly to another
part of the tape. Press the button again to return to playing
speed. The radio will play the last selected station while
the tape advances. You may select stations during FWD
operation by using TUNE, SEEK and P.SCAN controls.
SIDE (5): Press this button to play the other side
D
of the tape.
(6): Press this button to reduce background noise.
DOLBY ON will appear on the display. Press it again to
turn Dolby off. DLBY OFF will appear on the display.
Dolby Noise Reduction is manufactured under a license
from Dolby Laboratories Licensing Corporation. Dolby
-
and the double D symbol are trademarks of Dolby
Laboratories Licensing Corporation.
yellowblue