Cleaning Leather; Cleaning The Top Of The Instrument Panel; Cleaning Interior Plastic Components - Chevrolet 2000 Corvette Owner's Manual

Here are some cleaning tips:
D
Always read the instructions on the cleaner label.
D
Clean up stains as soon as you can
D
Carefully scrape off any excess stain.
D
Use a clean cloth or sponge, and change to a clean
area often. A soft brush may be used if stains
are stubborn.
D
If a ring forms on fabric after spot cleaning, clean the
entire area immediately or it will set.
Cleaning Coated Moldings
These moldings are around the hatch opening in the
rear area.
D
When lightly soiled, wipe with a sponge or soft
-
lint free cloth dampened with water.
D
When heavily soiled, use warm soapy water.

Cleaning Leather

Use a soft cloth with lukewarm water and a mild soap or
saddle soap and wipe dry with a soft cloth. Then, let the
--
before they set.
leather dry naturally. Do not use heat to dry.
D
D
D

Cleaning the Top of the Instrument Panel

Use only mild soap and water to clean the top surfaces
of the instrument panel. Sprays containing silicones or
waxes may cause annoying reflections in the windshield
and even make it difficult to see through the windshield
under certain conditions.

Cleaning Interior Plastic Components

Use only a mild soap and water solution on a soft
cloth or sponge. Commercial cleaners may affect the
surface finish.
For stubborn stains, use a leather cleaner. See your
dealer for this product.
Never use oils, varnishes, solvent
cleaners, furniture polish or shoe polish on leather.
Soiled or stained leather should be cleaned
immediately. If dirt is allowed to work into the
finish, it can harm the leather.
-
based or abrasive
6-57