Cleaning Interior Plastic Components - Chevrolet 1999 Prizm Owner's Manual

Cleaning Interior Plastic Components

Use only a mild soap and water solution on a soft
cloth or sponge. Commercial cleaners may affect the
surface finish.
Cleaning the Built
-
Your built in child restraint may be cleaned with mild
soap and lukewarm water. Don't use household cleaners.
They may weaken the harness or damage plastic parts.
-
The built in child restraint pad is attached to the child
restraint cushion and seatback with fastener strips. You
can remove the pad, machine wash it in cold water on a
gentle cycle and tumble dry it on a low heat setting.
Never bleach or iron the pad, and don't dry clean it.
Care of Safety Belts and Built
Child Restraint Harness
Keep the safety belts and the built
harness clean and dry.
in Child Restraint
-
in
-
-
in child restraint
CAUTION:
Do not bleach or dye safety belts or the built
child restraint harness. If you do, they may be
severely weakened. In a crash, they might not be
able to provide adequate protection. Clean the
safety belts and the child restraint harness only
with mild soap and lukewarm water.
Cleaning Glass Surfaces
Glass should be cleaned often. GM Glass Cleaner or a
liquid household glass cleaner will remove normal
tobacco smoke and dust films on interior glass. (See
"Appearance Care and Materials" in the Index.)
Don't use abrasive cleaners on glass, because they may
cause scratches. Avoid placing decals on the inside rear
window, since they may have to be scraped off later. If
abrasive cleaners are used on the inside of the rear
window, an electric defogger element may be damaged.
Any temporary license should not be attached across the
defogger grid.
yellowblue
-
in
6-47