Table of Contents
Advertisement
Cleaning and Maintenance
Clean filter
Open panel
1
Pull out the panel to a certain
angle as shown in the fig.
Remove filter
2
Remove the filter as indicated
in the fig.
Note:
■ The filter should be cleaned every three months. If there is much dust in the
operation environment, cleaning frequency can be increased.
■ After removing the filter, do not touch fins to avoid injury.
■ Do not use fire or hair dryer to dry the filter to avoid deformation or fire hazard.
Clean filter
3
● Use dust catcher or water to clean
the filter
● When the filter is very dirty, use
the water (below 45°C) to clean it,
and then put it in a shady and cool
place to dry.
Install filter
4
Install the filter and then close the
panel cover tightly.
26
Advertisement
Table of Contents
