Daikin FTYNV20AV1 Owner's Manual page 25

Introduction to buttons on remote controller
Note:
The air conditioner is designed to start discharging air only after it has reached
a certain temperature in heating mode (usually 1-5min depending on indoor ambient
temperature). Temperature setting range on remote controller: 16°C-30°C. Fan
speed setting range: auto, low speed, medium speed and high speed.
3
"+" or "-" button
● Each pressing of the "+" or "-" button can increase or decrease the set
temperature by 1°C. Hold the "+" or "-" button for at least 2s and the set
temperature on the remote controller will change quickly. After reaching to
the required time, release the button.
● Under TIMER ON, TIMER OFF or Clock setting, you can press the "+"or "-" button
to adjust time. (Refer to TIMER button for details)
4
FAN button
Press this button to select the fan speed in sequence: auto (AUTO), low speed ( ),
medium speed (
Note:
● Under auto mode, the air conditioner will select proper fan speed according to
ex-factory setting automatically.
● Low speed under dry mode.
5
SWING button
● Press this button to select up&down swing. In auto swing mode, the horizontal
louver of the air conditioner will swing up&down automatically at maximum angle.
This mode will be indicated on the display of the remote controller by an icon.
● Pressing "SWING" on the remote controller again will cause the horizontal louver
of the air conditioner to stop moving and stay fixed at that angle. In this mode,
the icon on the remote controller will disappear.
), high speed ( ).
21