3. Touch "SPECIAL".
4. Touch "REPLENISH INK".
5. Touch "REPLENISHING INK".
Replenishing ink starts.
When ink replenishing is completed, the
machine stops with a beep.
It takes approximately 30 seconds to complete
ink replenishment.
6. Touch "END".
7. Perform mastermaking/printing.
Refer to the machine Instruction Manual for
more details.
IMPORTANT
White bands appear because the ink has not
covered the entire surface of the drum. This is
normal. Perform about three runs of 30 prints
per one master.
Chapter 2
A3 Color Drum Type D1
4
2
51