Removing The Power Switch - Ricoh DD5450 Field Service Manual

(10) Removing the Power Switch

WARNING
● Always remove the power cord plug from
the outlet before replacing the switch.
1. Remove the control panel.
2. Widen the claws of the switch to remove the
socket.
REFERENCE
● When replacing the LED, remove the LED
from the socket.
3. Remove the nut and the washer to remove the
power switch.
Reinstallation
IMPORTANT
● Attach the power switch in the correct
direction as shown in the right figure.
● Attach the washer with the correct side.
● Attach the power switch so that it is located
in the center of the hole of the control panel
cover.
→See (6) above
Chapter 4
Claw
Socket
Socket
LED
Exterior
1
Claw
４
Direction of washer
Nut
Direction of power
switch
183