Install The Mainboard - PCchips M786 Series User Manual

Mainboard User's Manual

Install the Mainboard

Install the mainboard in a system chassis (case). The board is an
ATX size mainboard with a twin-tier of I/O ports. Ensure that your
case has an I/O cover plate that matches the ports on this
mainboard.
Install the mainboard in a case. Follow the instructions provided by
the case manufacturer using the hardware and internal mounting
points on the chassis.
ATX
PANEL1
Connect the power connector from the power supply to the ATX
connector on the mainboard.
If there is a cooling fan installed in the system chassis, connect the
cable from the cooling fan to the FAN2 fan power connector on
the mainboard.
If there are a microphone-in jack and/or a speaker-out jack on the
front pannel, connect the cables from the microphone-in and
speaker-out jacks to the PANEL2 header on the mainboard. Then
set the jumper JMIC1 to open setting.
Connect the case switches and indicator LEDs to the PANEL1
switch and LED connector header.
14
PANEL2- SpeakerOut &
MicrophoneIn header
LineOut
2 MICIN
-L 1
4 GND
6 MICP
-R 5
LineOut
FAN2