Link RLC-2 Manual page 53

Pass Name: Brief Functional Description
P0 C043 Program Passwords 0-3
P0 C044 Re-name a command name to a new name
P0 C045 Re-name the <EOF> key
P0 C046 Program the DTMF execution mask
P0 C047 Global DTMF mask change (Changes the DTMF mask on all commands)
P0 C048 Global change of the first digit in the command name
P0 C049 Program the courtesy beeps for all ports
P0 C050 Start Lack of activity timer #1
P0 C051 Start Lack of activity timer #2
P0 C052 Start Lack of activity timer #3
P0 C053 Start Lack of activity timer #4
P0 C054 Voice recall of the Lack of activity timer paramaters
P0 C055 Lack of activity timer Enable/Disable
P0 C056 Program the Lack of activity timers
P0 C057 Kerchunk filter Enable/Disable
P0 C058 Interrogate the Link system
P0 C059 Voice recall of Scheduler Day Counter
P0 C060 Program Scheduler Day Counter
P0 C061 Program Scheduler Events
P0 C062 Scheduler events Enable/Disable
P0 C063 Voice recall of Scheduler events
P0 C064 Recall message slot 00-99 (Voice, CW, Command, DVR)
P0 C065 Program message slot 00-99 (Voice, CW, Command, DVR)
P0 C066 Recall timer slot 00-23 (All controller timers)
P0 C067 Program timer slot 00-23 (All controller timers)
P0 C068 Analog alarm line Enable/Disable
P0 C069 Analog alarm program
P0 C070 Analog conversion faceplate program
P0 C071 Analog 1 High/Low recall
P0 C072 Analog 2 High/Low recall
P0 C073 Analog 3 High/Low recall
P0 C074 Analog 4 High/Low recall
P0 C075 Analog 1 High/Low value reset
P0 C076 Analog 2 High/Low value reset
P0 C077 Analog 3 High/Low value reset
P0 C078 Analog 4 High/Low value reset
P0 C079 Analog alarm condition interrogate
P0 C080 Analog line calibration
P0 C081 Analog 1 recall
P0 C082 Analog 2 recall
P0 C083 Analog 3 recall
P0 C084 Analog 4 recall
Command Listing (by name)
Copyright 1995 Link Communications Inc.
41