Link RLC-2 Manual page 41

29
Repeater - Common Link System Variables:
- Selects Repeater ON Link 1 and Link 2, TX and RX
-- COMMAND C032
- Removes Repeater OFF Link 1 and Link 2, TX and RX
-- COMMAND C033
- Allows Repeater to MONITOR Link 1 and Link 2 RX, no TX
-- COMMAND C034
Link 1 and Link 2 Messages, Beeps and Voice:
- Programs Link 1 Courtesy Beep
-- COMMAND C049*2
- Programs Link 2 Courtesy Beep
-- COMMAND C049*3
- Programs Link 1 'ON' Voice Message
-- COMMAND C065*07
- Programs Link 1 'OFF' Voice Message
-- COMMAND C065*09
- Programs Link 2 'ON' Voice Message
-- COMMAND C065*08
- Programs Link 2 'OFF' Voice Message
-- COMMAND C065*10
Link 1 and Link 2 Mode Control:
Link 1 and Link 2 Special Mode Programming:
- Locks Link 1 in its current mode
-- COMMAND C024
- Unlocks Link 1 from its current mode
-- COMMAND C025
- Locks Link 2 in its current mode
-- COMMAND C026
- Unlocks Link 2 from its current mode
-- COMMAND C027
- Programs Link 1 into Loop Back Mode (Repeater Mode)
-- COMMAND C013*1
- Programs Link 2 into Loop Back Mode (Repeater Mode)
-- COMMAND C014*1
- Programs Link 1 into Normal Linking Mode
-- COMMAND C013*0
- Programs Link 2 into Normal Linking Mode
-- COMMAND C014*0
- Supervisory Control Link 1 PTT
-- COMMAND C022
- Supervisory Control Link 2 PTT
-- COMMAND C023
Copyright 1995 Link Communications Inc.