Reinstalling/Using Washer Again - Haier HE HLPW028BXW Installation And User Manual

Top-load clothes washer
Hide thumbs Also See for HE HLPW028BXW:
Table of Contents

Advertisement

Available languages

Available languages

4.
If moving the washer, place the wash basket brace from the original packing
materials back into the top of the washer opening. Use masking tape to secure
the washer lid.
a
5.
Move and store your washer in an upright position only.

REINSTALLING/USING WASHER AGAIN

Plug into a grounded 3 prong outlet.
Do not remove the ground prong from the power cord plug.
Do not use an adapter.
Do not use an extension cord.
Failure to do so can result in death, fire or electrical shock.
To reinstall washer after non-use, vacation, winter storage, or moving:
1.
Refer to Installation Instructions to unpack, locate, level, and connect washer.
2.
Before using again, run washer through the following recommended procedure:
To use washer again:
1.
Flush water pipes and hoses. Reconnect water inlet hoses. Turn on both water
faucets.
2.
Plug in washer or reconnect power.
3.
Run the washer through a wash cycle to clean the wash tub and remove
antifreeze, if used. Use only HE High Efficiency detergent. Use only half the
amount recommended by the manufacturer for a medium-size load.
WARNING
Electrical Shock Hazard
30
Wash Basket Brace
A

Advertisement

Chapters

Table of Contents
loading

Table of Contents