Cycle Guide - Haier HE HLPW028BXW Installation And User Manual

There are 3 soil levels from which to choose. - Heavy, Normal, Light
WATER LEVEL BUTTON
D
Press the Water Level button to select an appropriate water level for your load.
Small is the lowest water level and Super is the highest.
DELAY START BUTTON
E
•
Press the Delay Start button to delay the start of your wash cycle between
1 - 24 hours in one hour increments.
•
The number of hours will be shown in the Estimated Time Remaining
Display. Each press of the Delay Start Button will increase the time by
1 hour.
•
One button press after 24 will cancel the Delay Start feature. You can also
cancel the Delay Start feature by pressing the power button to turn off the
washer.
•
Press the Start/Pause button to begin the countdown.
EXTRA RINSE BUTTON
F
Press to add an extra rinse to your wash cycle.
NOTE:
Some cycles have this option as a default. See the Cycle Guide for
details.
ESTIMATED TIME DISPLAY
G
•
The Estimated Time display shows the estimated cycle time in minutes.
•
When using the Delay Start feature, this display will show the hours/minutes
remaining as it counts down to the time set for the wash cycle to start.
CYCLE STATUS INDICATORS
H
•
The Cycle Status lights indicate the stages of the selected cycle.
START/PAUSE BUTTON
I
Press the Start/Pause button to start a selected cycle or to pause an operating
cycle.
NOTE:
After starting the wash cycle, you must pause the operating cycle
to change the Wash Temp, Soil Level and Water Level settings.
POWER BUTTON
J
Press POWER to turn on and off the washer.
IMPORTANT:
•
Turning off power by pressing the Power button does NOT disconnect
the washer from the power supply.
•
If the washer is powered on, but the Start/Pause button is not pressed
within 5 minutes, the washer will turn off automatically.

CYCLE GUIDE

IMPORTANT:
•
Do not wash, spin, or dry water-proof seats, mats or clothing.
•
Check garment label laundering instructions to select the proper washer
settings. The wrong settings could damage and discolor clothing. Certain
garments should be dry-cleaned only.
NOTE:
To protect your wash load, all options and settings are not available for
all cycles. The shaded boxes indicate the default settings for each cycle.
23