Tuner Setting - Sanyo DWM-3000 Instruction Manual

Tuner Setting

This DVD/VCR is equipped with a channel memory feature
which allows channels to skip up or down to the next channel set
into memory, skipping over unwanted channels. Before selecting
channels, they must be programmed into the DVD/VCR's memory.
In addition to normal VHF and UHF channels, this DVD/VCR can
receive up to 125 Cable TV channels. To use this DVD/VCR with
an antenna, set the TV/CATV menu option to the TV mode.
When shipped from the factory, this menu option is in the CATV
mode.
Preparation:
• Turn ON the TV and set to the video input mode.
• Press [VCR] to select the VCR mode. (The VCR indicator will
light.)
Note:
You can't select "CH SETUP" if you set the channel to "L".
TV/CATV selection
1. Press [SETUP/MENU].
The VCR menu screen will appear.
2. Press [4] or [5] to select "CH SETUP", then press ENTER.
MENU
TIMER REC SET
AUTO REPEAT ON OFF
SAP ON OFF
CH SETUP
SYSTEM SETUP
SPEAKER SETUP
TVGuardian SETUP
〈4/5/ENTER/MENU〉
3. Press [4] or [5] to select the "TV/CATV" option.
CH SETUP
TV CATV
AUTO CH MEMORY
ADD/DELETE
〈4/5/ENTER/MENU〉
4. Then press [ENTER] to select the TV or CATV mode.
CH SETUP
TV CATV
AUTO CH MEMORY
ADD/DELETE
〈4/5/ENTER/MENU〉
• The arrow indicates the selected mode.
TV: VHF/UHF channels
CATV: CABLE TV channels
5. Press [SETUP/MENU] until the menu screen is cleared.
Need help? Call
1-800-813-3435
VCR
ENTER
Setting channels automatically
The VCR can receive a maximum of 125 channels in CATV
mode, 69 channels in TV mode by presetting the channels into
memory.
1. Repeat above steps 1–2 and press [4] or [5] to select "AUTO
CH MEMORY".
CH SETUP
TV CATV
AUTO CH MEMORY
ADD/DELETE
〈4/5/ENTER/MENU〉
2. Then press [ENTER].
The auto tuning will start. The channel display will count up
and when finished, the screen returns to normal.
3. Press [SETUP/MENU] until the menu screen is cleared.
-E25-
SETUP/
MENU
4,5
CH 002