Chevrolet 1993 S-10 Pickup Owner's Manual page 91

For a single wiping cycle, turn the band to MIST. Hold
it
there until the
wipers start, then let
go. The wipers will stop after one cycle. If you want
more cycles, hold the band on MIST longer.
For steady wiping at low speed, turn the band away from
you to the LO
position. For high speed wiping, turn the band further, to HI. To stop the
wipers, move the band to the off symbol.
PO177
Low Speed Delay Wipers (Option)
You can set the wiper speed for a long or short delay between wipes. This
can be very useful in light rain or snow. Turn the band to choose the delay
time. The closer to LO, the shorter the delay.
Damaged wiper blades may prevent you from seeing well enough to
I
drive safely. To avoild damage, ble sure to &air ice and
SKIW
from
the wiper blades before usilng them. I f they're frozen to the
wi'ndshield, carefully lloosen or thaw them. I f your blades become
damaged, get new blades or blade inlserts.
I
I
leavy snow or ice can overload your wipers. A circuit breaker will stop them
until the motor cools. Clear away snow or ice to prevent an overload.
2-39