Chevrolet 1993 S-10 Pickup Owner's Manual page 42

Seats & Safety Belts
2. Put the restraint on the seat.
Follow the instructions for the child
restraint.
3. Secure the child in the child restraint as the instructions say.
c
4. Run the vehicle's safety belt through
or
around the restraint. The child
restraint instructions will show you how.
AM163061
5. Buckle the belt. Make sure the release button faces upward or outward,
6. To tighten the belt, pull its free end while you push
down on the child
so you'll be able to unbuckle it quickly if you ever need to.
restraint.
7.
Push and pull the child restraint in different directions to be sure it is
secure. If the child restraint isn't secure, turn the latch plate over and
buckle it again. Then see
if it is secure. If it isn't, secure the restraint in
a different place in the vehicle and contact the child restraint maker for
their advice.
To remove the child restraint, just unbuckle the vehicle's safe& belt. It will be
ready to work for an adult or larger child passenger,
1-28
I .
..
.
.