Chevrolet 1993 S-10 Pickup Owner's Manual page 20

Seats & Safety Belts
When you tilt the right front seatback fully forward, the whole seat will
slide forward.
After someone gets into the rear seat area, move the right front
seatback to its original position. Then move the seat rearward until it
locks.
1
CAUTION
,
If an easy entry right front seat isn't locked, it can move. In a
I
sudden stop or crash, the person sitting there could be injured. After
you've used it, be sure to push rearward on an easy entry seat to
be sure it is locked.
To get out, again tilt the seatback fully forward.
Jump Seat (Extended Cab Models)
I
KO808
Your extended cab pickup may have jump seats in the rear area. To fold the
jump seat down, pull down on the handle on the bottom of the seat until the
seat is in place. To store the seat, push
it
up until it is flush with the trim
panels. Don't let the safety belts be damaged by the hinges or the latches.
1-6