Chevrolet 1993 S-10 Pickup Owner's Manual page 283

Windshield Wiper Blade Inserts
i
..
i .
KO637
. .
. , '
:-,
; i y y
?-is;+;.-,
&!!f$i&
.
l'jf:.
j<-:q;*
j';gi3f47!:;I'
b,(..;',$<
t&..YT:i;;
; . l : z ~
.''! ..'
:.. y.?;i'!g.tyz
,
. . .
o rep ace your wlndshleld wiper blade inserts, lift the wiper arm away from
the windshield. Pinch the two tabs on the wiper arm and slide the insert out
of the bl'ade. Slide the new one in place. Make sure the tabs are locked into
position.
Air Conditioning
Every now and then have your dealership check your alr conditioning system
to be sure it has not lost any cooling ability. If you think the system is not
working prope'rly, have your dealership check
it
out as soon as possible.
The air conditioning will not work when the temperature is below 40°F (4°C).
Lubrication
Accelerator Control System
Refer to the Maintenance Schedule to determine how often the accelerator
linkage pivot points must be lubricated and what type of lubricant to use.
Accelerator cables and cruise control cables should not be lubricated. Any
cables that are worn or are hard to pull should be replaced.
When cleaning the engine compartment with water or steam, avoid directing
the flow onto the throffle linkage in a manner that would cause moisture
to
enter the cables.