Chevrolet 1993 S-10 Pickup Owner's Manual page 243

1
I
KO758
Tighten the wheel nuts firmly in a criss-cross sequence as shown. Remove
the wheel blocks.
A
Incorrect wheel nuts or improperly tightened wheel nuts can cause
the wheel to become loose and even come
off. This could lead
to
an accident. Be sure to use the correct wheel nuts. If you have to
replace them, be sure to get the right kind.
Stop somewhere as soon as you can and have the nuts tightened
with a torque wrench to 95
ft.
Ibs. (1 30 N.m ).
Storing The Tire in The Underbody Carrier
Put the tire on the ground at the rear of the vehicle, with the valve stem
pointed down and to the rear.
Pull the retaining bar through the wheel. Put the chisel end of the wheel
wrench, on an angle, through the hole in the rear bumper and into the hoist
shaft. Turn the wheel wrench clockwise until the tire is raised against the
underside of the vehicle.
You will hear two "clicks" when the tire is secure, but pull on the tire to
make sure.
5-27