Table of Contents
Advertisement
4
Using suitable screws, fix the Assure Horizontal SHRU to the slab.
5
Make sure that the unit is installed horizontally. The internal bore of the
Assure Horizontal SHRU already has a slope of 2% to ensure the correct flow
of waste water from the shower.
6
Connect the mains cold water to the unit's inlet (3), and preheated water
outlet (4) from the unit to the cold side of the shower mixer tap and/or
domestic water heater (depending on installation configuration). Use both of
the provided male 1/2'' fittings and proceed to seal in accordance with best
plumbing practice.
Connect the Assure Horizontal SHRU drain water outlet (2) to the drain pipe.
4
1
5 5 5 5 5 5
3
13
2
Advertisement
Table of Contents
