Connect the mains cold water to the unit's inlet (3), and preheated water outlet
4
(4) from the unit to the cold side of the shower mixer tap and/or domestic water
heater (depending on installation configuration). Use both of the provided Male
1/2'' fittings and proceed to seal in accordance with best plumbing practices.
Connect the Assure Horizontal SHRU drain water outlet (2) to the drain pipe.
5
We recommend that the installer performs a leak test on the mains water circuit
and on the drain water circuit to ensure the integrity of the inlet and outlet
connections.
6
Assemble the waste trap and shower tray.
4
1
5 5 5 5 5 5
3
11
2