Setting Up The Projection Tv Automatically - Sony KP-65WS510 Operating Instructions Manual

Installing and Connecting the Projection TV

Setting Up the Projection TV Automatically

Using Auto Setup
32
After you finish connecting your projection TV, you can run Auto Setup to
set up your channels. The Auto Setup screen appears when you turn your
projection TV on for the first time after installing it. If you do not want to set
up the channels at this time, you can do it later by using the Auto Program
feature in the Channel menu (see page 56).
✍
The Auto Setup feature does not apply for installations that use a cable
box for all channel selection.
1
Press
POWER on the front panel of your projection TV or on the remote
to turn on the projection TV.
control
2
Press the TV (FUNCTION)
briefly appear.
3
Press on your projection TV to run Auto Setup, or press
CH+
exit. If you use the channel buttons on your remote control, be sure to
use the main set of buttons ( ).
Projection TV front panel
✍
You can run Auto Program by selecting it in the Channel menu, as
described on page 56.
button on your remote control. Red light will
to
CH–