Rev (-1) Mode Setting Procedure - Panasonic AJ-D440 Service Manual

3-20. REV (-1) Mode Setting
Procedure
<Setting Procedure>
TYPE How to Setting
A Select the -1.0 speed by SEARCH Dial.
B (1) Set the VTR to 25M Playback mode
(2) Select the -1.0 speed by SEARCH
Dial.
C (1) Open the SERVICE MENU.
(2) Press "PLAY" and "REW" button
simultaneously.
D (1) Connect the front panel of AJ-D750 or
Editing Controller.
(2) Select the -1.0 speed by SEARCH
Dial.
E (1) Set the VTR to STILL mode by press
"PLAY" button twice.
(2) Press "PLAY" and "RESET" button
simultaneously.
F (1) Open the SERVICE MENU.
(3) Press "PLAY", "STOP" and "END"
button simultaneously.
G (1) Open the SERVICE MENU.
(2) Press "PLAY" and "REW" button
simultaneously.
(Classified list of REV mode setting)
TYPE
A AJ-D440, AJ-D450, AJ-D750, AJ-D850,
AJ-LT75, AJ-LT85
B AJ-D940, AJ-D950, AJ-D950A
C AJ-D640, AJ-D650, AJ-D780
D AJ-DE77
E AJ-D200, AJ-D210, AJ-D215, AJ-D400,
AJ-D700, AJ-D700A,
D800A,
AJ-D810, AJ-D810A, AJ-D90, AJ-D900W,
AJ-D900WA, AJ-D910WA, AJ-PD900W,
AJ-PD900WA, AJ-D610
F AJ-D220, AJ-D230, AJ-D230H, AJ-D250
G AJ-D92, AJ-D94, AJ-D95DC
NOTE : Above setting only apply to item "REV Tape
Pass Confirmation and Adjustment (T4 post
height adjustment)". All models should be set
to 25M mode with REV (-1) speed playback.
3-21. CTL Self Recording Level
Model
AJ-D800, AJ-
TEST POINT CTL : (refer to Table of Test Point)
ADJ. T4 post height
MODE PLAY, REV×1
TAPE Blank Tape
M.EQ Oscilloscope
2-32
Confirmation