Power Cord Set Requirements - Compaq Presario Series Maintenance And Service Manual

COMPAQ
Product Description
Home Removal & Replacement
PRODUCT DESCRIPTION
Models and
Features

Power Cord Set Requirements

Digital
The power cord set (flexible cord and wall plug) received with the computer meets the
Dashboard
requirements for use in the country where the computer was purchased.
Power cord sets for use in other countries must meet the requirements of the country where you
CPU Controls
use the computer. For more information on power cord set requirements, contact your Compaq
and Lights
authorized dealer, reseller, or service provider.
Right Easy
General Requirements
Access Panel
The requirements listed below are applicable to all countries:
Left Easy
Access Panel
USB
Keyboard
Controls
Rear CPU
Connectors
Power Cord
Set
Requirements
Maintenance and Service Guide
Compaq Presario EZ2000 Series Computers
Jumper & Switch Information
1 The length of the power cord set must be at least 6.00 feet (1.8 m) and
a maximum of 9.75 feet (3.0 m).
2 All power cord sets must be approved by an acceptable accredited
agency responsible for evaluation in the country where the power cord
set will be used.
3 The power cord set must have a minimum current capacity of 10A and a
nominal voltage rating of 125 or 250 volts AC, as required by each
country's power system.
4 The appliance coupler must meet the mechanical configuration of an EN
60 320/IEC 320 Standard Sheet C13 connector, for mating with
appliance inlet on the Switch Box.
STORE | PRODUCTS | SERVICES | SUPPORT | CONTACT US | SEARCH
Troubleshooting
United States
Illustrated Parts Catalog
Specifications