Bulb Replacement - Cadillac 2000 Escalade Manual

Bulb Replacement

The following procedure tells you how to replace your
headlamp bulbs. For the type of bulb to use, see
"Replacement Bulbs"in the Index. For any bulbs not
listed in this section, contact your service department.
Halogen Bulbs
CAUTION:
Halogen bulbs have pressurized gas inside and
can burst if you drop or scratch the bulb. You or
others could be injured. Be sure to read and
follow the instructions on the bulb package.
Headlamps
1. Remove the parking/turn signal assembly as
described under "Parking/Turn Signal Lamps,"
following this procedure. The parking/turn signal
assembly must be removed to provide clearance for
headlamp removal.
2. Remove the two turn signal bulb sockets and the
sidemarker bulb socket from the parking/turn signal
assembly by turning counterclockwise.
3. Set the parking/turn signal assembly to the side.
4. Remove the two bolts at the top of the radiator
support as shown.
5. Pull the headlamp assembly out.
6-33