Multifunction Lever - Cadillac 2000 Escalade Manual

Multifunction Lever

The lever on the left side of the steering column
includes your:
D
Turn and Lane Change Signals
D
-
Headlamp High/Low
D
Windshield Wipers
D
Windshield Washer
D
Cruise Control
2-42
Beam Changer
Turn and Lane Change Signals
The turn signal has two upward (for right) and two
downward (for left) positions. These positions allow you
to signal a turn or a lane change.
To signal a turn, move the lever all the way up or down.
When the turn is finished, the lever will return automatically.
To signal a lane change, just raise or lower the lever
until the arrow starts to flash. Hold it there until you
complete your lane change. The lever will return by
itself when you release it.
If you move the lever all the way up or down and the arrow
flashes at twice the normal rate, a signal bulb may be burned
out and other drivers may not see your turn signal.
If a bulb is burned out, replace it to help avoid an
accident. If the arrows don't go on at all when you
signal a turn, check for burned
fuse (see "Fuses" in the Index).
An arrow located on the
instrument panel will flash
in the direction of the turn
or lane change.
-
out bulbs and a blown