Screen Settings - Sony KLV-40ZX1M Operating Instructions Manual

Screen Settings

Wide Mode
Auto Wide
4:3 Default
Select the default screen
mode to use for 4:3
sources
Display Area
Horizontal Center
Vertical Center
Vertical Size
~
• Some options are not available with PC signal connected to HDMI input.
• Horizontal Center, Vertical Center and Vertical Size may not be available depending on the input signal.
Wide Zoom Fills the screen with minimum distortion.
Normal Displays the 4:3 picture in its original aspect ratio when the original
source is 4:3.
Full
Enlarges the picture horizontally to fill the screen when the original
source is 4:3. When the original source is 16:9 (High-definition
source), select this mode to display the 16:9 picture in its original size.
Zoom
Select to enlarge the picture horizontally and vertically to fill the
screen while maintaining the aspect ratio.
On Automatically changes Wide Mode setting based upon content. If
frequent screen changes are disturbing to you, select Off.
Off Turns off the Auto Wide option. Choose a Wide Mode from the
Wide Mode option.
Wide Zoom
Enlarges the 4:3 picture to fill the 16:9 screen, displaying as much of
the original image as possible.
Normal Displays the 4:3 picture in its original aspect ratio.
Off Select to continue using the current Wide Mode setting when the
input is changed.
~
• 4:3 Default is not available if Auto Wide is set to Off.
• If 4:3 Default is set to anything but Off, the Wide Mode setting applies only to the
current input. When you change inputs, Wide Mode is automatically replaced with the
4:3 Default setting for 4:3 sources. To retain the current Wide Mode setting as inputs
are changed, set 4:3 Default to Off.
Full Pixel Displays the picture for 1080i, 1080p or 1080/24p sources in its
original size when Wide Mode is set to Full.
Normal Displays the picture in its original size.
-1/-2
Enlarges the picture to hide the edges of the picture.
Allows you to move the position of the picture horizontally (left and right).
Allows you to move the position of the picture vertically (up and down).
Adjusts the vertical size of a standard-definition picture.
19
US