Sony KLV-40ZX1M Operating Instructions Manual page 27

Condition
Certain programs on DVD or
other digital sources display a
loss of detail, especially during
fast-motion or dark scenes
Remote control does not
operate
Explanation/Solution
• This is due to the digital compression of the source content used by certain
DVDs which may cause your LCD monitor screen to display less detail than
usual, or cause artifacts (small blocks or dots, pixelations) to appear on your
screen. These signal compressions are more visible and are dependent on the
clarity and resolution of the unit.
• To determine if the problem is with the remote control or not, press a button on
the unit.
• Press VOL +/- to adjust the volume.
• Press TV on the remote control when the button is not light up.
• Check the polarity of the batteries or replace the batteries.
• Point the remote control at the remote control sensor located at the front of the
unit.
• Keep the remote control sensor area clear from obstacles.
• Fluorescent lamps can interfere with your remote control operation; try turning
off the fluorescent lamps.
• Check the button that can operate this unit (see page 13).
27
US