Getting Started; Installing The Unit; Carrying The Unit; Preparation For Table-Top Stand - Sony KLV-40ZX1M Operating Instructions Manual

Television - lcd / led: 40" bravia® zx series lcd monitor
Hide thumbs Also See for KLV-40ZX1M:
Table of Contents

Advertisement

Available languages

Available languages

Getting Started

1. Installing the Unit

This Unit can be mounted on a wall using a Wall-
Mount Bracket or placed on a TV stand (each sold
separately). This section will explain:
• How to carry the Unit
• Preparation for a Table-Top stand
• Preparation for a Wall-Mount Bracket
• Installation against a wall or enclosed area
• Securing the Unit

Carrying the Unit

Be sure to follow these guidelines to protect your
property and avoid causing serious injury.
• Before carrying the Unit, disconnect all cables.
• Carrying this Unit requires two or more people.
• When carrying the Unit, place your hand as
illustrated and hold it securely. Do not subject the
Unit to shocks, vibration, or excessive force.
• Lift the Unit by placing your palm directly
underneath the panel but do not put stress on the
LCD panel.
Be sure to hold the bottom of the panel.

Preparation for Table-Top Stand

Follow the assembling steps required to place on
the Table-Top Stand.
1
Remove the Table-Top Stand, accessory box
and accessory bag from the carton. The
screws and booklet can be found in the
accessory bag attached on the rear of the LCD
monitor.
For product protection and safety reasons,
Sony strongly recommends that you use the
screws provided with the display.
~
• Do not remove the blue tape that secures the plate on
the rear of the LCD monitor until you finish installing
the Table-Top Stand.
Accessory bag
Table-Top Stand
Accessory box
LCD monitor
2
Place the Table-Top Stand on a level and
stable surface, then remove the stand cover
from the Table-Top Stand.
Stand cover
(Continued)
5
US

Advertisement

Table of Contents
loading

Table of Contents