Table of Contents
Advertisement
Memory Seat and Mirrors (Option)
Adjust the driver's seat to a comfortable position. Also
adjust the interior and exterior mirrors. Press memory
button "M' and memory button "1" at the same time.
These buttons are located on the side of the driver's
seat closest to the door. Seat and mirror positions may
be programmed for two additional drivers by repeating
the above steps and pressing memory button
"2" or
"3"
instead of memory button
1.
If your vehicle is in PARK (P), you can recall mirror
and seating positions by pressing and holding
one of
the three memory buttons. This will adjust the seat and
mirrors to where you have previously programmed
them. Seat and mirror movement is immediately stoppe
if the memory button is released
or if a seat or mirror
control is moved.
Note that the exterior mirrors will only adjust when the
ignition is turned on.
Also note that if you try to adjust the driver's memory
seat and it doesn't move, try opening the driver's door.
This will re-activate power to the driver's seat. (Power
to the driver's seat "times out" after 30 seconds. Power
to the passenger's seat is always present.)
1-5
Advertisement
Table of Contents
