Specifications - Kohler Mira Showers Escape Thermostatic 9.0 kW Installation And User Manual

European Conformity Information
The Mira Escape range of showers comply with the following European directives:
2006/95/EC Low Voltage Directive, 2004/108/EC EMC Directive.
The Mira Escape range of showers are high power appliances and are subject to
conditional connection. If the main electrical supply fuse is rated less than 80 Amps,
the local electricity supply company must be contacted to con¿rm if the electrical
supply is adequate.
The Mira Escape range of showers comply with the requirements of the UK's
water regulations.
Plumbing
Minimum Dynamic Pressure
Maximum Dynamic Pressure
Maximum Static Pressure
Minimum Static Pressure
Maximum Inlet Temperature
Minimum Inlet Temperature
Inlet Connection
Maximum Water Hardness
Outlet Connection
Electrical
Nominal Power at 230 V ac
Nominal Power at 240 V ac
Recommended MCB Rating
Maximum Supply Cable Size
Recommended RCD Rating
Recommended Isolator Switch
Appliance Sealing Rating
Maximum Ambient Temperature
Minimum Ambient Temperature
Dimensions
Height
Width
Depth

SPECIFICATIONS

Escape 9.0
70 kPa (0.7 bar)
500 kPa (5 bar)
1000 kPa (10 bar)
20 kPa (0.2 bar)
1/2" BSP Male / 15 mm Compression Fitting
200 ppm CaCO
1/2" BSP Male
Escape 9.0
8.3 kW
9.0 kW
40 A
30 mA tripping current
45 A double-pole with 3 mm contact separation
IP X4 - Suitable for installation in Zone 1
6
Variant
Escape 9.8
70 kPa (0.7 bar)
30°C
2°C
3
Variant
Escape 9.8
9.0 kW
9.8 kW
45 A
16 mm²
30°C
2°C
348 mm
207 mm
90 mm