Table of Contents
Advertisement
SENSOR SETTING (HUMAN SENSING)
Adjusts the threshold level of [HUMAN SENSING].
When the human icon is located on the right side of the white color bar or vermilion color wave, a person is not
detected.
NOTE: The [HUMAN SENSING] function starts after the OSD menu is closed.
START TIME (HUMAN SENSING)
Adjusts the wait time before entering to low brightness mode or power saving mode when the Human Sensor detects
no person.
DV MODE
Dynamic Visual Mode allows you to select from the following settings:
STANDARD: Standard setting.
TEXT: Setting that makes letters and lines crisp; best suited for basic word processing and spreadsheets.
MOVIE: Setting that boosts dark tones; best suited for movies.
GAMING: Setting that boosts whole tones; best suited for games that use vivid, colorful images.
PHOTO: Setting that optimizes contrast; best suited for still images.
DYNAMIC: Setting that adjusts the brightness by detecting the screen's black areas and optimizes it.
NOTE: This function is disabled when [Color Control System] is set to [L/B], [PROGRAMMABLE] or
[DICOM SIM.].
[STANDARD] is used for TCO Certificate compliance.
SCREEN
AUTO ADJUST (Analog input only)
Automatically adjusts the image position, the [H.SIZE] and [FINE] settings.
AUTO CONTRAST (Analog input only)
Adjusts the image displayed for non-standard video inputs.
LEFT / RIGHT (Analog input only)
Controls horizontal image position within the display area of the LCD.
DOWN / UP (Analog input only)
Controls vertical image position within the display area of the LCD.
H.SIZE (Analog input only)
Adjusts the horizontal size by increasing or decreasing the setting.
If the [AUTO ADJUST] function does not give you a satisfactory picture setting, additional tuning can be performed by
using the [H.SIZE] function (dot clock). A Moiré test pattern can be used for this. This function may alter the width of
the picture. Use the [ ] or [ ] key to center the image on the screen. If the [H.SIZE] is incorrectly calibrated, the result
would look like the left drawing. The image should be homogeneous.
When [H.SIZE] value is
wrong.
When [H.SIZE] value is
improved.
English-15
When [H.SIZE] value is
correct.
Advertisement
Table of Contents
