Table of Contents
Advertisement
ECO MODE
Decreases the amount of power consumption by reducing the brightness level.
OFF: Does not function.
1: Sets the brightness variable range from 0% to 70%.
This setting can adjust brightness to a range in which power is reduced by 15% compared to the maximum brightness
setting.
2: Sets the brightness variable range from 0% to 30%.
This setting can adjust brightness to a range in which power is reduced by 35% (EA231WU)/40% (EA241F) compared
to the maximum brightness setting.
When this function is set to [ON], a [CARBON FOOTPRINT] bar will appear alongside the [BRIGHTNESS]
adjustment bar.
NOTE: This function is disabled when [DV MODE] (See
This function is disabled when [Color Control System] is set to [DICOM SIM.].
To enter the [ECO MODE], touch the [ECO] key.
When you touch the [ECO] key, the setting cycles through [1]
AUTO BRIGHTNESS
OFF: Does not function.
ON (AMBIENT LIGHT): Automatically adjusts the brightness to the optimal setting by detecting the brightness level of
the environment.*
1
*1: Please refer to
page 28
for full "Auto Brightness" information.
NOTE: This function is disabled when [DV MODE] is set to [DYNAMIC].
This function is disabled when [Color Control System] is set to [DICOM SIM.].
BLACK LEVEL
Adjusts the brightness level of black when displayed on screen.
OFF MODE SETTING
The Intelligent Power Manager allows the monitor to enter into power saving mode after a period of inactivity.
OFF: The monitor enters into power saving mode automatically when the input signal is lost.
ON: The monitor enters into power saving mode automatically when the amount of surrounding light goes below the
level determined by you. The level can be adjusted in the [OFF MODE SENSOR SETTING].
When in power saving mode, the LED on the front of the monitor becomes dark blue. When in power saving mode,
touch any of the front keys, except for [ ] and [INPUT] keys, to return to normal mode.
When the amount of surrounding light returns to normal levels, the monitor will automatically return to normal mode.
SENSOR SETTING (OFF MODE SETTING)
Adjusts the threshold level for the ambient light sensor for detecting low light conditions and shows the current sensor
measurement result.
START TIME (OFF MODE SETTING)
Adjusts the wait time to enter into a lower power consumption level when the ambient light sensor detects low light
conditions.
HUMAN SENSING
The sensor detects the movement of a person by using the [HUMAN SENSING] function. The [HUMAN SENSING]
function has three settings:
OFF: Does not function.
1 (LIGHT): After it detects that there is no person during a period of time, the monitor shifts to low brightness mode
automatically to reduce the power consumption. When a person comes near the monitor again, the monitor will
automatically return to normal mode. [START TIME] adjusts the period of time to wait before entering low brightness
mode.
2 (DEEP): After it detects that there is no person, the monitor shifts to power saving mode automatically to reduce the
power consumption. When a person comes near the monitor again, it resumes from the power saving mode.
NOTE: Detects a person within about 1.5 m from the monitor.
page
15) is set to [DYNAMIC].
English-14
[2]
[OFF]
[1].
Advertisement
Table of Contents
