Yealink T57 User Manual

YEALINK T57
USER GUIDE
Using Basic Call Functions
Placing a Call
Using the handset:
1. Pick up the handset.
2. Enter the number, and then tap Send
Using the speakerphone:
1. With the handset on-hook, press
Send
2. Enter the number, and then tap
Using the headset:
1. With the headset connected, press
2. Enter the number, and then tap Send
Note: During a call, you can alternate between the headset, hands-free
speakerphone and handset modes by pressing the
Speakerphone
key or by picking up the handset. Headset mode requires a
connected headset.
Answering a Call
Using the handset:
Pick up the handset.
Using the speakerphone:
Press .
Using the headset:
Press .
Note: You can reject an incoming call by tapping
Ending a Call
Using the handset:
End Call
Hang up the handset or tap
Using the speakerphone:
End Call
Press or .
Using the headset:
Tap End Call .
Redialing a Call
• Press to enter the Placed Calls
• Press twice when the phone is idle to dial out the last dialed number.
Muting and Un-muting a Call
• Press to mute the microphone during a call.
• Press again to un-mute the call.
Holding and Resuming a Call
To Hold a call:
Smart Choice Communications | (800) 217-3096 | www.smartchoiceus.com | techsupport@smartchoiceus.com
.
.
.
to activate the headset mode.
.
HEADSET
key, the
Reject
.
.
list, and then tap the desired entry.
Press or Hold during an active call.
To Resume the call, do one of the following:
• If there is only one call on hold, press
• If there is more than one call on hold, select the desired call, and then press
Transferring a Call
You can transfer a call in the following ways:
Performing a Blind Transfer
Transfer
1. Press or during an active call. The call is placed on hold.
2. Enter the number you want to transfer to.
B Transfer
3. Press or .
Performing a Semi-Attended Transfer
1. Press or Transfer during an active call. The call is placed on hold.
2. Enter the number you want to transfer to, and then press
3. Press or Transfer when you hear the ring-back tone.
Performing a Attended Transfer
1. Press or Transfer during an active call. The call is placed on hold.
2. Enter the number you want to transfer to, and then press
3. Press or Transfer when the second party answers.
Forwarding a Call
To enable call forward:
1. Navigate to
Menu -> Features ->
2. Select the desired forward type:
Always Forward
----Incoming calls are forwarded unconditionally.
Busy Forward ----Incoming calls are forwarded when the phone is busy.
No Answer Forward
----Incoming calls are forwarded if not answered after a
period of time.
3. Enter the number you want to forward to. For
desired ring time to wait before forwarding from the
4. Tap
Save to accept the change.
Initiating a Conference Call
1. Tap
Conference during an active call. The call is placed on hold.
2. Enter the number of the second party, and then tap
3. Tap
Conference again when the second party answers. Three parties are now joined in
the conference.
Note: You can split the conference call into two individual calls by tapping
Configuring and Using Speed Dial
To configure a speed dial key:
1. Navigate to
Menu -> Features ->
2. Select the desired DSS key.
3. Select
SpeedDial Type
from the
enter a label in the Label field and then enter the number in the
4. Tap
Save
to accept the change.
To use the speed dial key:
Press the speed dial key to dial out the preset number.
or Resume .
Send
.
Send
.
Call Forward .
No Answer Forward , select the
After Ring Time
Conference
.
Dsskey .
field, select the desired line from the
Value field.
© 2021 Smart Choice Communications, LLC
Resume
or .
field.
Split
.
Account ID
field,