Advertisement
Quick Links
Installation and Assembly:
Desktop Mount with Desk Clamp and Grommet for 19" - 30"
LCD Screens
Models: LCT100S
GROMMET INSTALLATION
DESK CLAMP INSTALLATION
Max Load Capacity: 20 lbs (9 kg)
2300 White Oak Circle • Aurora, Il 60502 • (800) 865-2112 • Fax: (800) 359-6500 • www.peerless-av.com
ISSUED: 07-25-11
SHEET #: 090-9202-6
2020-03-09
Advertisement
Related Manuals for peerless-AV LCD Screens
Summary of Contents for peerless-AV LCD Screens
- Page 1 Desktop Mount with Desk Clamp and Grommet for 19" - 30" LCD Screens Models: LCT100S GROMMET INSTALLATION DESK CLAMP INSTALLATION Max Load Capacity: 20 lbs (9 kg) 2300 White Oak Circle • Aurora, Il 60502 • (800) 865-2112 • Fax: (800) 359-6500 • www.peerless-av.com ISSUED: 07-25-11 SHEET #: 090-9202-6 2020-03-09...
- Page 2 NOTE: Read entire instruction sheet before you start installation and assembly. WARNING • Do not begin to install your Peerless product until you have read and understood the instructions and warnings contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, please call Peerless customer care at 1-800-865-2112.
- Page 3 Before you begin, make sure all parts shown are included with your product. Parts List Description column assembly adapter plate assembly grommet assembly round rubber pads square rubber pads M4 x 12 mm phillips screw M4 x 25 mm phillips screw spacer 4 mm allen wrench 2.5 mm allen wrench...
-
Page 4: Clamp Assembly
Clamp Installation Method Grommet Installation Method Remove clamp assembly from column assembly Apply four rubber pads (D, E) to bottom of column (A) as shown in figure 1.1. Remove mounting plate assembly (A) as shown below. Attach column from grommet assembly (C) and attach to column assembly (A) to mounting surface with a maximum assembly (A) with four M6 x 8 mm screws using thickness of 3". - Page 5 Attaching Adapter Plate Assembly to Screen WARNING • Tighten screws so adapter plate assembly is firmly attached. Do not tighten with excessive force. Overtightening can cause stress damage to screws, greatly reducing their holding power and possibly causing screw heads to become detached. Tighten to 40 in. • lb (4.5 N.M.) maximum torque. • If screws don't get three complete turns into the screen inserts or if screws bottom out and plate is still not tightly secured, damage may occur to screen or product may fail.
-
Page 6: Set Screw
Loosen and position lock collar to desired height and retighten lock collar as shown in figure 5.1. Insert adapter plate assembly (B) onto column assembly (A) and let it rest on lock collar as shown in figure 5.2. Tighten set screw on rear of adapter plate assembly (B) using 2.5mm allen wrench (J) as shown in figure 5.3. fig. 5.1 fig. 5.3 fig. 5.2 LOCK COLLAR SET SCREW LOCK COLLAR Cables may be routed using cable clip (K). CABLES 6 of 8 ISSUED: 07-25-11... - Page 7 To lock down rotation, tighten set screw shown in detail 2. To lock down tilt, tighten screw shown in detail 3. To lock down swivel, tighten screw shown in detail 4. TILT SCREW SET SCREW DETAIL 3 360° DETAIL 2 +80/-20°...
- Page 8 Záruka Záruka Garantia TÜR Garanti̇ www.peerless-av.com/warranty Peerless-AV Peerless-AV Europe Peerless-AV América Latina 2300 White Oak Circle Unit 3 Watford Interchange, Av. de las Industrias 413 Aurora, IL 60502 Colonial Way, Watford, Herts, Parque Industrial Escobedo Email: tech@peerlessmounts.com WD24 4WP, United Kingdom General Escobedo N.L., México 66062...