Advertisement
Quick Links
Installation and Assembly:
32" - 65" Flat Panel Display Stand
Models: SS550P, SS550P-S
Suitable For Institutional Use
2300 White Oak Circle • Aurora, Il 60502 • (800) 865-2112 • Fax: (800) 359-6500 • www.peerlessmounts.com
This product is UL Listed. It must be
installed by a qualifi ed professional
installer.
Max Load Capacity:
150 lb (68 kg) display
50 lb (22.7 kg) per shelf
ISSUED: 09-05-06 SHEET #: 202-9166-12 12-20-13
Advertisement
Related Manuals for peerless-AV SS550P
Summary of Contents for peerless-AV SS550P
- Page 1 Installation and Assembly: 32" - 65" Flat Panel Display Stand Models: SS550P, SS550P-S This product is UL Listed. It must be installed by a qualifi ed professional installer. Suitable For Institutional Use Max Load Capacity: 150 lb (68 kg) display 50 lb (22.7 kg) per shelf...
- Page 2 NOTE: Read entire instruction sheet before you start installation and assembly. WARNING • Do not begin to install your Peerless product until you have read and understood the instructions and warnings contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, for US customers please call Peerless customer care at 1-800-865-2112, for all international customers, please contact your local distributor.
- Page 3 Before you begin, make sure all parts shown are included with your product. Parts List SS550P SS550P-S Description Qty. Part # Part# A screen mount bracket 201-P1156 201-4156 B hook plate 201-P1157 201-4157 C shelf support 201-P1158 201-4158 D shelf clamp bracket...
- Page 4 Adapter Bracket Fasteners M5 x 12 mm (4) M6 x 12 mm (4) (520-1027) (520-1128) M8 x 12 mm (4) .75" spacer (4) (520-9571) (540-1059) M5 x 25 mm (4) M6 x 25 mm (4) M8 x 25 mm (4) (520-9543) (520-1208) (520-1031)
- Page 5 Loosely attach four 1/4-20 x 12 mm screws Slide shelf support (C) onto upright (H) so that (L) and 1/4-20 nuts (N) to shelf support (C). 1/4-20 nuts (N) slide into slots of upright (H) as shown in fi gure 3 and detail 1. Slide shelf support to desired position, level, then tighten 1/4-20 x 12 mm screws (L) using 4 mm allen wrench (R).
- Page 6 Loosely attach six 1/4-20 x 12 mm screws (L) and Slide display mount bracket (A) onto upright (H) 1/4-20 nuts (N) to display mount bracket (A). so that 1/4-20 nuts (N) slide into slots of upright (H) as shown in fi gure 7 and detail 2. Slide display mount bracket to desired position, level, then tighten 1/4-20 x 12 mm screws (L) using 4 mm allen wrench (R).
- Page 7 Attaching Display Using Universal Plate with Adapter Brackets For attaching displays with VESA 100 hole pattern, skip to page 11. Attach universal plate (F) to hook plate (B) using Attach hook plate (B) to display mount bracket (A). four M10 x 15 mm socket screws (T). Tighten screws using 6 mm allen wrench (U).
- Page 8 Installing Adapter Brackets WARNING • Tighten screws so adapter brackets are fi rmly attached. Do not tighten with excessive force. Overtightening can cause stress damage to screws, greatly reducing their holding power and possibly causing screw heads to become detached. Tighten to 40 in. • lb (4.5 N.M.) maximum torque. •...
- Page 9 For Flat Back Display 13-1 Begin with the shortest length screw, hand thread through multi-washer and adapter bracket into display as shown below. Screw must make at least three full turns into the mounting hole and fi t snug into place. Do not over tighten.
- Page 10 Mounting and Removing Flat Panel Display WARNING • Always use an assistant or mechanical lifting equipment to safely lift and position the display. Hook adapter brackets (G) onto universal plate (F), then slowly swing display in as shown. Turn screws clockwise at least six times to prevent display from being removed as shown in detail 4.
- Page 11 Attaching Display with VESA 100 Mounting Pattern WARNING • If screws don't get three complete turns in the display inserts or if screws bottom out and hook plate is still not tightly secured, damage may occur to display or product may fail. Choose hole pattern as shown in fi...