Checkpoints - Mitsubishi MELDAS TRS50 Manual

(5) Grounding
l

CHECKPOINTS

Keep the detector mounted in the same position as when it
was shipped; moving it will cause the control modes to
undergo change.
Do not touch the base amplifier
because of its high voltage.
Under no circumstances should the power unit be touched
since
the capacitor will
actually flowing
The main circuitry area in the AC servo system is configured
without transformers and so the machine system and control
unit must be grounded.
Since the OCP circuit is isolated from the other circuits,
do not connect the OCP ground (CHB) and the ground AG/LG of
the other circuits simultaneously with the synchroscope
ground.
at the
charged even if no power is
be
unitwhenthelampis
the
top of the AX04 card
on.