Care Instructions - pewag starmove Mounting Instructions

Demounting
Remove the depositing chain from the side chain by opening
1
the depositing hook.
Open the tension lever and loosen the tension chain.
2
Open the locking hook (starting from the inside of the wheel)
3
and pull the chain off the wheel.

Care instructions

Make sure that the chains are dried quickly after each use. Dirty
chains should be rinsed in hot water and then dried. Badly rusted
chains should be re-galvanised.
Adjustment
For worn tires, the fitting of the chains
can be improved by shortening the
inside chain. Distribute shortening
intervals regularly – after shortening,
the various inside chain sections
should ideally have the same length. Some chains come with
integrated shortening elements.
Repair
Regular inspection: Turn the chains when one side of the links is
worn down by 40 % of the wire diameter. Exception: Chains with
welded-on grip links or wear detection system. For repairs, please
contact your retailer.
Please refer to the vehicle manufacturer information and the
enclosed instructions and warnings.
Subject to technical modifications and colour changes.
EN