Table of Contents
Advertisement
DC Under Voltage: if the DC voltage is over default lower limit, DC UNDER VOLTAGE
indicator will be on and show
DC Over Current: if the DC current is over default limit, DC OVER CURRENT indicator will
be on and show
Overtemp Fail: if the temperature is over default limit, OVERTEMP FAIL indicator will be
on and show dark
Temp Warn: if the temperature is close to default limit, TEMP WARN indicator will on
and show
AC Fail: if the input AC is abnormal (too high/low voltage), AC FAIL indicator will be on
and show dark
Figure 3-13
3.5.
Cooling Device
The Cooling Device tab provides to monitor the status of the cooling devices. The cooling
device indicators will show the following information.
Cooling Device Number: There are four cooling devices numbering 1 to 4.
Cooling Device Fan Speed and RPM (Revolutions Per Minute): The statistic chart shows
the history of RPM.
Cooling Device Status: If the cooling device is normal, the indicator will show blank; if
the cooling device is abnormal, the indicator will show _Failed_.
amber
amber
color.
red
color.
amber
color.
red
color.
Power Supply Status Indicators
INFORMATION:
Cooling device RPM statistic charts will be updated by every minute.
color.
Management and Monitoring
27
Advertisement
Table of Contents
